Study on glucose oxidase fermentation coupled with membrane dialysis

The repression of glucose oxidase (GOD) biosynthesis by catabolites during fermentation can be alleviated through membrane dialysis fermentation (MDF). The results show that the volumetric enzyme productivity of MDF was two times higher than that of the control (fermentation without dialysis), and its total enzyme activity was increased by 30–50%. The operation conditions of MDF, such as pore size of the membrane, initiating time for membrane dialysis, and volume of dialysate used, were optimized. The content of amino acids and organic acids in the fermentation broth and the dialysate in the reservoir were assessed by amino acid analyzer and ionic chromatography, respectively. The relationship among the contents of pyruvic acid, gluconic acid, and enzyme activity during fermentation was analyzed quantitatively. Furthermore, the effect of membrane dialysis technology applied to the low-yield strain was found to be more effective than that applied to the high-yield strain.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.     

Effect of reaction media on the growth and photoluminescence of colloidal CdSe nanocrystals

Using cadium oxide (CdO) as the Cd precursor and tri-n-octylphosphine selenide (TOPSe) as the Se source, TOP-capped and TOP/tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals were synthesized without the use of an acid. The synthetic approach involved the addition of a TOPSe/TOP solution into a CdO/TOP solution with or without TOPO at one temperature and subsequent growth at a lower temperature. The temporal evolution of the optical properties, namely, absorption and luminescence, of the growing nanocrystals was monitored in detail. A comprehensive examination on the control of the photoluminescence (PL) properties was performed by systematically varying the TOP/TOPO weight ratio of the reaction media. Surprisingly, a rational choice of 100% TOP or 80% TOP was found to produce "quality" nanocrystals when monitored under the present experimental conditions and growth-time scale. The term "quality" is mainly based on the sharp features and rich substructure exhibited in the absorption spectra of the growing nanocrystals, as well as the sharp features in the emission spectra with narrow full width at half-maximum (fwhm). There are two distinguishable stages of growth: an early stage (<5 min) and a later stage. TOP plays a major role in the control of a slow growth rate in the early stage, while TOPO controls slow growth in the later stage. The optical sensitivity of the growing nanocrystals when dispersed in nonpolar or polar solvents was studied, including two size-dependent parameters, namely, the solvent sensitivity (PL intensity) and nonresonant Stokes shift (NRSS). The insights gained from the present study enable a synthetic approach in which high-quality CdSe nanocrystals are achieved with high synthetic reproducibility.     

杂多酸在活性炭上的固载化Ⅲ．活性炭在酸性介质中对钨硅杂多酸（SiW_（12））的吸附

在氢离子浓度均为３ｍｏｌ／Ｌ的硫酸，盐酸，磷酸，醋酸水溶液中和冰醋酸中研究了具有Ｋｅｇｇｉｎ结构的硅钨杂多酸（ＳｉＷ＿（１２））在不同来源活性炭上的吸附作用。各活性炭对ＳｉＷ＿（１２）吸附等温线的形式是不相同的，吸附剂载体的微孔结构以及杂多酸的溶剂化起着重要的作用。并且在无机酸介质中，杂多酸的吸附量比在水溶液中成规律性地增加，且与酸强度成正比关系。在有机酸介质中，吸附作用比较复杂。根据所得结果，提出了在酸性介质中杂多酸在活性炭表面的吸附模型。     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

2,5-二甲基-4-羟基-3(2H)呋喃酮的合成

以乙酰丙酮(1)为原料，经电解氧化偶联，Paal-Knorr闭环，Baeyer-Villiger氧化，水解等步骤，合成了一种重要的杂环香料，2,5-二甲基-4-羟基-3(2H)呋喃酮(6)。     

液膜稳定性的研究

利用单滴法对三种表面活性剂的液膜体系的稳定性进行了研究，重点考察了载体的影响，讨论了介质与表面活性剂，介质与载体，载体与表面活性剂的相互作用对液膜稳定性的影响，并根据膜强度数据，给出了液膜稳定的条件。     

Determination and Differentiation of Two Seemingly Identical Medicinal Herbs by Capillary Electrophoresis with Electrochemical Detection

A high-performance capillary electrophoresis with electrochemical detection (CE-ED) method has been employed for the determination of six bioactive ingredients in traditional Chinese herbs, Herba cepbalanoplosis segeti and Herba cirsii japonici. The effects of several factors such as the acidity and concentration of running buffer, the separation voltage, the applied potential and the injection time on CE-ED were investigated. Under the optimum conditions, the six analytes could be well separated within 21 min in a 75 cm length capillary at the separation voltage of 15 kV in a 50 mmol L^–1 borax running buffer (pH 8.4). A 300 m diameter carbon disk electrode was used as the working electrode positioned carefully opposite the outlet of the capillary in a wall-jet configuration at potential of +950 mV (vs. SCE). Good linear relationship was established between peak current and concentration of analytes over two orders of magnitude with detection limits (S/N=3) ranged from 1.5×10^–7 to 6.0×10^–7 g mL^–1 for all six analytes. This proposed method has been successfully applied for the analysis of traditional Chinese herbs after a relatively simple extraction procedure, further on, for the differentiation of these above two seemingly identical herbs based on their electropherograms or characteristic electrochemical profiles.     

A facile electrochemical synthesis of caffeic acid derivatives in the presence of acetylacetone or methyl acetoacetate in aqueous medium

The anodic oxidation of caffeic acid in the presence of acetylacetone or methyl acetoacetate in aqueous solution has been studied by cyclic voltammetry and controlled-potential electrolysis techniques. The result showed that caffeic acid was oxidized to the corresponding o-benzoquinone, which underwent further Michael-addition with acetylacetone or methyl acetoacetate to produce caffeic acid derivative 3,4-dihydroxy-6-(1-acetylacetone)-yl cinnamic acid 4a or 3,4-dihydroxy-6-(1-acetyl-methylacetate)-yl cinnamic acid 4b.     

The adsorption and dissociation of O2 on Cu low-index surfaces

The extended LEPS of O(2)-Cu single crystal plane systems is constructed by means of 5-MP (the 5-parameter Morse potential). Both the adsorption and dissociation of O(2) on Cu low-index surfaces are investigated with extended LEPS in detail. All critical characteristics of the system that we obtain, such as adsorption geometry, binding energy, eigenvalues for vibration, etc., are in good agreement with the experimental results. Our calculated results suggest there are many differences between O(2)-Cu (110) and O(2)-Pd (110) systems. On a Cu (110) surface, O(2) adsorbs in a tilted configuration and there are two lowest energy dissociation channels along the [001] and [10] directions, respectively. We speculate that the adsorption geometry of O(2) on the metal surfaces relates to the lattice constant of metal. Meanwhile, We use the concepts of the molecular dissociation limit and the surface dissociation distance to analyze again the dissociation mechanism of the O(2) on the low-index surfaces.